19.4 C
Los Angeles
Thursday, October 6, 2022

How to Find Network Name (SSID) of Wavlink Range Extender?

Your WiFi network is identified by its...

Facing Amped Wireless Login Issues? Check This Guide!

Are you troubled by the login issues...

Victony WA1200 Extender Won’t Connect to Internet [Easy Fixes]

Is your Victony WA1200 not connecting to...

Victony WA1200 Extender Won’t Connect to Internet [Easy Fixes]

TechnologyVictony WA1200 Extender Won’t Connect to Internet

Is your Victony WA1200 not connecting to the internet? That’s sad. All your online tasks might have been stalled, aren’t they? Well, don’t worry! This post highlights some of the topmost fixes using which you can get rid of the problem you are facing with your Victony WA1200 extender. Stick to reading.

Fix: Victony WA1200 Won’t Connect to Internet

  1. Reboot Your Extender

Do you have a bad habit of using your devices for too long? If yes, then you need to abandon this habit right away. This habit might have made your Victony extender a victim of technical glitches. To get rid of those bugs, you need to restart your Victony WA1200 range extender. Here, we are shedding some light on the correct procedure for restarting your Victony extender:

  • First things first, switch off the Victony device by pushing the Power button.
  • Now, you can unplug it.
  • Wait for as long as you can.
  • Re-plug your Victony device.
  • Push the Power button again (this time for starting the extender).

After you’re done rebooting your Victony wireless range extender, consider connecting it to the internet and see if you’ve got lucky. No? Well, then a little hard work needs to be done.

  1. Check the Ethernet Cable

Is the Ethernet cable connecting your Victony WA1200 and the main router doing its work properly? We doubt it. Many instances have been noted where users acted carelessly by putting a damaged Ethernet cable to use and end up facing the Victony extender not connecting to the internet issue.

To make sure that you don’t enter the list of their names, always use a non-damaged Ethernet cable for connecting your networking devices. Any certified Ethernet cable can be made use of. However, you need to ensure the finger-tight status of the Ethernet connection from the end of your Victony WA1200 extender and the host router.

  1. Bring Your Devices Closer

The next hack in the line to fix the Victony WA1200 extender keeps disconnecting issue is to reduce the distance through which your WiFi devices are separated. For your knowledge, it has a major role to play when it comes to the Victony device’s performance. Your WiFi devices need to be placed at an optimal distance in order to extract the best performance out of your extender.

You cannot place them under the same base as there’s a high possibility of their WiFi signals getting clashed. On the other hand, too much distance is also not allowed. The reason being it affects the propagation of WiFi signals emitted by your devices. Do you want to face issues accessing the Victony setup wizard? Of course not!

  1. Relocate Your Victony Extender

After setting up the extender, users are asked to place it at the desired location. It is done so that every dead zone will be able to get a lag-free internet connection. But, it seems that you haven’t selected the correct location for your Victony extender due to which it is unable to sustain an internet connection. So, without wasting much time, put your Victony extender to a new location.

However, during relocation, you need to make sure that your extender is not being given space near electromagnetic waves emitting appliances or gadgets, reflexive surfaces, metal objects, or utensils containing a large amount of water. Such things tend to block or deviate the wireless signals emitted by your home router.

  1. Reset the Extender

If all of your efforts to connect the Victony WA1200 extender have gone in vain, then there is a high possibility that the extender might not be configured properly. Thus, to rid yourself of the problem, you have to reset the extender. But, keep in mind that restoring the extender to the default factory settings means erasing all the customized data. You will have to perform Victony extender setup from scratch thereafter.

The extender can be reset by the push of the Reset button located on the unit. However, you need to be very careful throughout the process. As soon as the extender resets, you can set it up again by accessing the Victony default IP.

Sum Up

That’s all that can be done in order to fix the Victony WA1200 extender keeps disconnecting issue. It is hoped that the troubleshooting tactics highlighted above will help you get rid of it with ease.

Check out our other content

Check out other tags:

Most Popular Articles

error: Content is protected !!