If your Wavlink WiFi extender is not functioning properly or if you are unable to connect to the Wavlink WiFi extender, you can easily fix the problem by following the step-by-step instructions mentioned here. This post consists of the topmost Wavlink extender troubleshooting techniques that will help you make the status of your device work again. Read on.
Fixed: Wavlink WiFi Extender Not Working
If you try to reach the Wavlink WiFi range extender setup page by typing wifi.wavlink.com, you could encounter a notice stating that the page cannot be displayed or a ‘404’ error. There are an infinite number of potential causes for your Wavlink WiFi extender to be inoperable. The following is a troubleshooting guide for potential difficulties that may be preventing your Wavlink WiFi extender from functioning properly.
Fix 1: Verify the Connections
Check to see that the Wavlink WiFi extender you are using is properly connected to a power supply and getting the appropriate amount of electricity. Be sure that the power indicator light on the Wavlink WiFi extender is steady and not flickering. It shouldn’t be flashing in any way. It is necessary for you to examine the connection that your client device has established with the Wavlink range extender. You have the option of connecting to the Wavlink WiFi network either through a cable connection or through a wireless connection.
Fix 2: Check the Internet Connection
If your Wavlink WiFi extender is not functioning properly, the problem may lie in a lack of or unreliable connection to the internet. Verify if there is a connection to the internet. Make sure it is functioning. Directly connecting a WiFi device to a router or modem allows users to get access to the Internet and see web pages. In the event that you are unable to load a web page, this indicates that there is a problem with the connection to the internet. You may address the issue by getting in touch with your Internet service provider.
Fix 3: Update the Wavlink WiFi Extender Firmware
It’s possible that the firmware on your Wavlink WiFi range extender is either old or corrupt, which is causing it to not function as it should. As a result, it is highly recommended to always use the most recent version of the extender’s firmware. You may get the most recent firmware file for your device by going to the wifi.wavlink.com setup window and downloading it there. But, there’s a catch. You are not supposed to download the incorrect firmware file for your Wavlink range extender. Doing such things can be harmful to your extender’s performance. Chances are that it will cease to work forever.
Fix 4: Reboot Your Wavlink Extender
If the solutions that have been provided thus far are unable to fix the problem with the Wavlink WiFi extender, you may try power cycling the device. You will need to wait at least five minutes after turning off the Wavlink WiFi range extender. After turning your extender back on and connecting the devices, you may now determine whether or not your Wavlink WiFi extender is functioning properly.
Fix 5: Perform Hard Reset
You may do a hard reset on your extender in the event that none of the procedures react or assist in resolving the issue with the Wavlink extender not functioning. You will need to use something sharp and pointed to assist you to push and hold the reset button for an extended period of time. When your Wavlink WiFi device begins the restart process, you may release the button.
That’s all about how to fix the Wavlink range extender not working problem. It is anticipated that the tips mentioned in this post will help you get the problem fixed. However, do not ignore reconfiguring your extender after performing the factory default reset. Access the Wavlink login window and set up the device again. After that, you can resume your journey with the extender.