Updating the Wavlink extender’s firmware is necessary in order to introduce new features and fix minor bugs. However, not everyone is able to get success with the Wavlink firmware update process. Are you also experiencing the Wavlink extender firmware update issue? If you have answered the question in yes, then worry not. By the end of this post, the issue you are facing will become a past thing for you.
Here, we will make you familiar with numerous Wavlink troubleshooting tips using which you can easily fix the firmware update stuck issue. So, let’s get going.
Fixed: Wavlink Extender Firmware Update Stuck
-
Connect Your Devices Properly
The very first thing due to which the firmware update is stuck might be improper connectivity between your Wavlink extender and router. Thus, check for the same. If you have connected your devices wirelessly, then make sure that they are not exceeding the boundary line of signals emitted by each other. Avoid minimizing the distance to zero.
In case you have connected your devices using a wired source, then make sure that the network cable being used is not damaged. If it is, then know that the time to bring a new Ethernet cable has come. Besides, never forget to make the connection finger-tight.
-
Reboot Your Extender
Chances are that technical glitches are halting your extender’s firmware from getting updated. An excellent solution to get rid of these glitches is rebooting. Rebooting is an act of giving some rest to your Wavlink WiFi extender. Let us find out how.
-
Switch off the extender and remove it from the power socket.
-
Wait for some time.
-
Connect your extender back into its power socket and switch it on.
-
Eliminate Signal Interference
Sometimes, the WiFi signals of your Wavlink extender get interfered creating the firmware update stuck issue. A lot of things interfere with the Wavlink extender WiFi signals. Let’s have a look at some of them.
-
Electrical Gadgets: Microwave ovens, televisions, treadmills, refrigerators, etc.
-
Bluetooth Devices: Speakers, mice, keyboards, headphones, etc.
-
Reflexive Surfaces: Mirrors, Lenses, Glasses, etc.
-
Objects with a large amount of water: Fish tanks, indoor water walls, etc.
-
Meta Objects: Aluminum doors, metal studs, utensils, etc.
So, these were the things that should not be present near your Wavlink extender during the firmware update process. Apart from this, neither your extender nor the host router should be placed beside a thick concrete wall. It won’t cost you luck if a central location is assigned to your Wavlink extender for equal signal distribution.
-
Check the Firmware File
Users in the hassle of updating their Wavlink extenders forget that firmware updates are model specifics. As a result, they end up downloading the wrong firmware file and uploading it on their extender. Perhaps, you have committed the same mistake. So, verify whether you have downloaded the firmware file as per the model number of your Wavlink device. If not, then you have left with no resort other than resetting your Wavlink to the factory default mode.
Thus, find the Reset button on the Wavlink extender and press it gently. Wait for a few moments and check whether it has returned to the factory default mode or not. If it is, then do the Wavlink WiFi extender setup from scratch.
-
Update the Firmware Again
After resetting the Wavlink extender, you need to do a firmware update again. So, check out the instructions given below in order to update the Wavlink firmware correctly:
-
Ensure that the Wavlink extender is powered up.
-
Connect the extender to the router using a cable or wireless source.
-
Go to an updated web browser on your computer.
-
Now, download the newest version of the firmware file for the model of the Wavlink extender you have.
-
Once done, visit wifi.wavlink.com.
-
Those users’ whole extender supports the ap.setup web address need to visit the same.
-
Log in to your Wavlink extender using the default admin password.
-
Once you reach the dashboard of your Wavlink range extender, click the Advanced tab and locate the Firmware Update option.
-
The Firmware Update window welcomes you.
-
Here, you will be prompted to upload the firmware file you downloaded earlier.
-
So, locate the same and upload it.
-
Wait patiently and let the firmware update process get completed successfully.
This is how the firmware can be updated by accessing the Wavlink WiFi extender login page. Now, your device is all set to re-commence your digital journey.
Sum Up
Firmware updates are boons for Wavlink extenders as they allow users to access the latest technical features without getting the existing WiFi device replaces. Hopefully, the guide shared here will help you get rid of the Wavlink extender firmware update stuck issue fixed.