Netgear WiFi Range Extender [Troubleshooting Tips

0
216
mywifiext

WiFi range extenders are easy to connect with WiFi router with the help of the Ethernet cable. But it is also linked without any wire or cable using WPS.

You just have to plug it close to the router and connect Ethernet cable to establish the connection and form Netgear Extender setup in your home. But, there can be technical issues that can make your network connection weak.

So, you should learn some solutions and tips to dispel the problems. Here, in this article post, you will get to know six troubleshooting tips to make the extender network secure and make its performance better.

Troubleshooting Tips: Netgear Range Extender

Here in this article you will found six tips to dispel technical problems like extender is not working, interface is not responding, or login URL not loading. So, let’s check them out one by one.

1.Choose Optimal Spot in Your Home

Interruption in WiFi signals can cause by electronic devices like microwave ovens. So, you must choose location or wall socket that is far from the electronic devices. If your router or extender is near any interruption device, then replace it to another optimal.

2.Never Use Damaged Ethernet cable

You can easily connect your extender with the router with the help of Ethernet cable. But it must be in good condition. You should check it once again and if you find any cut on the cable, then replace it with a new one quickly.

Also you must check the wall socket once, and make sure it is in good condition. Call an electrician to fix it, if damaged.

3.Choose Right Ports to Establish Network

If you are using the Ethernet cable to establish a connection between the extender and router, then you must select the correct ports. Pattern is WAN port of the extender and LAN port of the router.

If you are establishing link using WPS button, then plug it in wall socket, which is close to the router.

4.Use Updated Web Browser to Login

Web browser is use to log in to the Netgear WiFi range extender interface dashboard mywifiext, so that you can change settings and update your device. But the browser must be up to date. If not, then update it by going in to the browser Settings> About> click on the UPDATE button.

5.Reboot Netgear Range Extender

Sometimes, all the above written tips fail to deliver the solution. So, in this type of situation, you have to restart the range extender. Just follow some steps.

  • Find and press the Power on/off button twice.
  • First press will turn off the Netgear device.
  • Second device will restart the range extender.

6.Perform Factory Reset on Extender

Rebooting the device will refresh the settings, but it also fails to dispel the problem occasionally. So, in this tight issue situation, you have to reset the device. You just have to long press the reset button on the back of the range extender.

But after resetting the device, you must rearrange Netgear range extender settings and networks from mywifiext.local, because all the settings and data will be deleted.

Last Verdict

Here, you learned troubleshooting tips that help you to dispel any technical issue like extender is not connecting to router, extender not working, interface not responding or any other problem. Hope, you have increased your knowledge from these above written troubleshooting tips.