Netgear Extender Keeps Rebooting? Let’s Fix It!

0
2945
performing the Netgear WiFi extender reset process.
Netgear wifi extender reset

If you are reading this post, it means your Netgear extender has become a pain in your head by constantly rebooting. Well, you don’t need to panic about it. We are here to assist you in any manner. So, without further ado, read the outlined passages where we have elaborated this issue in detail.

Before we jump to the troubleshooting tips, we want you to familiarize yourself with the reasons that caused this issue. By knowing the reasons, you will easily solve the problem without performing the Netgear WiFi extender reset process.

Why Does Netgear Extender Keep Rebooting?

There can be many possible reasons why your Netgear extender keeps rebooting. Below we have outlined some contributing factors. You need to read them carefully.

  • Netgear extender not getting a sufficient power supply.

  • The firmware of your extender is outdated.

  • Usage of faulty and damaged wire.

  • Overheating of Netgear extender.

  • The extender has not been configured properly.

  • Netgear extender hardware is broken.

These are the major reasons that dragged you to this issue with the Netgear extender. Now, let’s move forward toward the fixes.

Fix: Netgear Extender Keeps Rebooting

Reboot the Extender

The foremost thing you need to do is to restart the device because most of the time the device creates this kind of issue when it becomes the victim of technical glitches. So, there is the possibility that your device is also surrounded by technical glitches. To do a reboot, you need to follow the mentioned below steps:

  • First, cut off the power supply of the extender.

  • Remove the device from the power outlet.

  • Give some recovery time to the extender.

  • Put the device back into the electric socket.

  • Now, turn on the power button.

This is how you can reboot your device in the right manner. Now, you should check your device to make sure that the issue is solved or not. If not, then move to the next hack.

Update the Firmware

The outdated firmware might have also put the extender in danger. So, there is a possibility that your device is running into its outdated firmware. Because the old version does not support the features of the extender properly, so in this situation, you should check the firmware version first. To do this, you need to access the 192.168.1.250 default IP address of the extender. For the further process, you need to read the outlined steps:

  • Plug the extender into the good-condition socket.

  • Next, power on the system like a computer or laptop for the further process.

  • Launch a web browser on the computer.

  • Type the default IP address into the address bar.

  • Push the Enter key.

  • Now, you will see the login screen of the extender.

  • You need to put the credentials into the on-screen fields.

  • The extender setup wizard will open in the form of you.

  • Here, you need to follow the on-screen steps.

These are the steps that you need to perform to get the firmware update to solve the keeps rebooting issue.

Check the Power Supply

Now, you need to take a small check on the power socket. Sometimes, users use a damaged power socket that does not supply the proper power to the extender. As a result, extenders lead to problems. So, to tackle this issue, check the wall outlet properly. If you found any damage on the socket while checking, then change it.

Apart from it, you also need to check the power cable, because there is a chance that your power cable is damaged.

Check the Hardware of the Extender

If you are still in the same situation, then take a look at the extender hardware. Maybe your device is damaged somewhere and that damaged part of the extender led to this issue. So, you need to change your device as soon as possible.

Hence, these are the possible solutions that you need to perform to tackle the Netgear extender issue.