Want to have seamless internet access in your home? So looking to install a Netgear Nighthawk router? But the connection between the router and modem is not happening? If the answer to the above questions is a yes then you have landed the right post. Why? Since this post is going to be helpful to you in getting rid of the problem that you are currently stuck with. Here, we have mentioned the best possible solutions to eliminate the cause that is stopping you from connecting the Netgear router to modem. We are sure that after you have applied these fixes, you will be able to easily connect the two devices in discussion, login to Nighthawk router and complete its setup. Let’s get started to resolve the problem!
How to Fix Netgear Router & Modem Connection Issue?
The fixes given here are the topmost fixes that have helped many users in the past. So, we are sure that at least one out of these fixes will help you make the connection. As there are various reasons that can hamper the connection, there are different possible solutions. You may not need to apply all of these. Try them one by one and see which one works for you.
-
Pull Them in Proximity
The Netgear Nighthawk router and the modem should be placed in close proximity to each other. Only if the devices can communicate with each other, they can connect easily. So, if they are placed far from each other, then it is time you reduce the distance separating them. Plug them into wall outlets and then try to connect them by following the setup instructions.
-
Reduce Interference
Wireless interference is one of the major reasons why the devices do not connect. Check that your router is not sharing its location with other networking devices or home appliances that can interfere with the WiFi signals. Change the location and then try the connection.
-
Reboot and Retry
Rebooting works like magic when it comes to resolving technical glitches from the technical devices. These glitches can also be responsible for the issue that you are facing right now. So, without waiting for any further delay, reboot your router and modem. Rebooting is a simple process. Power off the devices for some time and then power them on after some time. Try making the connection now.
-
Check Power Supply
Maybe the router or modem is not receiving a consistent power supply. If both or any of these devices is not powered on completely, then connection between them will be far from happening. We recommend you checking the power sockets and the power cables now. Make any amendments if required and ensure that both devices are fully booted up with an adequate power supplied to them. Now connect the devices and access Nighthawk login admin page to complete the setup process.
-
Use a LAN Cable
You can connect the Netgear router to the modem in two ways. One is using a wireless mode and the other is a wired mode. At times, due to signal interruptions or interference a wireless connection gives you trouble and is hard to make. So, we recommend you opt for a wired connection between the two devices now.
Get hold of a LAN cable. We suggest using a CAT 6 cable. Use this to make the connection between the two devices now. Make sure that you are using the right ports on both devices and that the cable in use is good. Avoid using a damaged or worn out cable to make the connection.
Wrapping Things Up
This is all about how you can fix the connectivity issue between the Netgear Nighthawk router and the modem. Once you have applied the solutions discussed in this post, connecting the two devices will become as easy job for you. So, make the connection and get the Netgear router setup done with ease. After you have completed the setup, you can connect the client devices in your home to the router’s network and enjoy seamless network throughout your home.