Victony WiFi Extender No Internet Access [Resolved]

0
482
victony wifi extender setup,
victony wifi extender setup, how to set up victony wifi extender

Have you just installed a Victony WiFi range extender in your house? Well, that’s a pretty good decision. Now, you might be accessing a lag-free internet connection even in hard-to-reach places. But, you look worried. Are you facing the Victony WiFi extender no internet access issue? If you have nodded your head in yes, then you’ve reached the right post. Here, you will get acquainted with different ways using which you can easily get rid of the problem you are endeavoring with. But, before that, take a look at the reasons that might have dragged you to the issue in the first place.

Reasons: Victony Extender No Internet Access

Here are the most possible reasons that might result in the Victony WiFi extender no internet access issue:

  • Your Victony range extender’s placement is not perfect.

  • Technical glitches are not allowing your Victony extender to connect to the internet.

  • The Ethernet cable connecting your Victony extender and router is damaged.

  • You have placed your Victony extender and the main router at too much distance.

  • The improper configuration process can also result in the no internet access issue.

Now, let’s go through the troubleshooting tips that will help you fix the Victony WiFi extender no internet access issue.

Fixed: Victony Extender No Internet Access

  1. Place Your Extender Properly

Where is your Victony extender placed? Is it sitting on a shelf in the kitchen? Is it placed near your BT hub? If any of the last questions have been answered in yes, then, unfortunately, you’ve selected the wrong location for your Victony WiFi extender. The WiFi signals of your wireless extender are either getting blocked or wasted in any of these cases.

So, relocate your Victony extender without giving second thought a chance to occupy your mind. Your Victony range extender is supposed to be away from devices that emit radio wave frequencies. Some of those devices are microwave ovens, televisions, refrigerators, treadmills, baby monitors, Bluetooth speakers, etc. Apart from this, reflexive surfaces and objects containing a large amount of water also need to be placed away from the Victony device.

  1. Reboot the Victony Extender

Technical glitches can occur at any time. But, the good thing is that you can fix them with ease by trying the simplest hack of rebooting. For your information, rebooting is one of the most efficient ways to get rid of technical glitches.

To reboot the extender, first of all, take its power adapter out of the wall socket, wait for as long as you can, and connect the extender’s power adapted back to the wall outlet. Once done, see whether you get the internet access.

  1. Reduce the Extender-Router Distance

Knowing how to set up Victony WiFi extender won’t be of any good if there is an immense gap between your range extender and the host router. If that is the case with you, then rectify your mistake by bringing your WiFi devices a little closer. It will facilitate the seamless propagation of WiFi signals.

However, you should not place your WiFi devices too close while reducing the distance between them. It is because it increases the chances of their WiFi signals getting involved in a conflict.

  1. Check the Ethernet Cable

If the Ethernet cable connecting your Victony WiFi extender and the host router are damaged, then it can break the direct communication between both devices. So, you need to ensure that the Ethernet cable in action is not fragmented from any end. If it is, consider replacing it right away before the time runs out of hand.

You need to also check the firmness of the Ethernet connection. The stronger signal transmission takes place through the strong Ethernet connection only.

  1. Reset the Extender

Tried all the above-mentioned Victony extender troubleshooting hacks and still facing the problem? It seems that you have done Victony WiFi extender setup improperly. Well, in that case, you have to properly install the device. But, before that, reset the range extender to the default factory mode.

So, without wasting much time, start finding the Reset button on your wireless extender and press it carefully. Wait for the extender to reset. Thereafter, access the ap.setup wizard and set up your Victony extender again.

The Bottom Line

Facing the Victony WiFi extender no internet access issue is one of the most annoying things in the world. However, by properly diagnosing and troubleshooting, one can easily fix the issue. We hope that the tips shared above will put the ball in your court. Thanks for reading the post.