You just gave up on your new Wavlink WiFi repeater, huh? It’s the best option available for eliminating dead spots in a WiFi network. The question is what went wrong? To what end are you fretting? Does your iPhone still not connect to the repeater after you have finished the Wavlink WiFi extender setup? Fear not! All bases are covered here. The troubleshooting methods described here should be followed religiously.
But before diving into strategies for fixing the problem, it’s a good idea to review the written explanations. Having this information at your disposal will make fixing the problem much simpler.
Why Your iPhone Won’t Connect to Wavlink Extender?
-
There might be a technical issue with your iPhone. You should be aware that technological issues are capable of rendering your gadget useless. They are, therefore, the primary factors contributing to the problem you’re now experiencing.
-
If you can’t connect to the Wavlink repeater through WiFi, it’s probably because you’re entering an erroneous password. A common cause for an iPhone failing to connect to a Wavlink repeater is an incorrect WiFi password.
-
Connecting the iPhone to the Wavlink repeater may also be impossible if the network signal is weak. If the signal strength is low or nonexistent, it’s unreasonable to expect your devices to establish a connection.
-
Viruses may be removed from your iPhone with the help of an antivirus program. But they may also act as the barrier that stops your gadgets from talking to one another.
-
Regular firmware updates are required for all Wavlink WiFi repeaters. You apparently weren’t paying attention when the ap.setup Wavlink login page prompted you to upgrade the firmware on your extender. As a heads-up, know that your Wavlink repeater’s firmware has complete control over its operation. As a consequence, its antiquated version is likely one of the primary causes of the iPhone’s inability to communicate with the Wavlink WiFi repeater.
These, therefore, are some of the possible causes of the problem you’re experiencing. Once the root cause of the problem has been identified, we may proceed with troubleshooting.
Solved: iPhone Won’t Connect to Wavlink Extender
-
If you’re having technical difficulties, the first thing you should do is restart the device. You should thus immediately restart your iPhone. That doesn’t seem like a very long procedure. But it may take a while, so plan accordingly. Simply holding down the iPhone’s Power button will bring up a menu of alternatives. After that, choose to restart, and you’re done.
-
Verify that the WiFi password you used to get into your Wavlink repeater was correct. Whether you think you made a mistake in entering the password, try entering it again and seeing if you can connect your iPhone to the Wavlink repeater this time.
-
Fixing the link between your Wavlink repeater and the host router should fix the weak network signals. Which implies you’ll need to ensure a steady connection. In the case of wireless connections, users should ensure that there is a direct line of sight between the two devices, while users of wired connections should check that the cable they are using is in good working order.
-
Turn off any security software or ad-blocking features you may have on your iPhone. Also, they may block you from using your iPhone with the repeater, as was previously indicated. Experiment with eliminating the problem now and report back.
-
The Wavlink wireless repeater’s firmware may be updated by signing in to the device’s web interface via the Wavlink login password. The procedure is identical to that used when updating the router’s firmware using the Wavlink router’s administration interface. One thing to remember is that your extender model cannot use the firmware file of any other extender model. This behavior might permanently damage your Wavlink repeater.
Verdict
That’s all there is to do if your iPhone still won’t sync with your Wavlink repeater. Here’s hoping that after trying the aforementioned solutions, you won’t have any more difficulty with this issue. We appreciate you taking the time to read this.