To manage the Wireless-N WiFi repeater, one needs to access its default IP address. The reason being it halts the access to the WiFi repeater login window which acts as a doorway to reach the web management interface of the repeater. Are you also finding it difficult to access the Wireless-N repeater IP address? If yes, then read none other than this write-up. Here, we will provide you with various solutions that will help you access the repeater’s IP with ease. So, don’t wait and read on.
Before you head over to troubleshoot the issue, have a nudge on the process to access the repeater’s IP address. Perhaps, you missed an important step in the process.
Steps to Access WiFi Repeater IP Address
-
Let the power light gain some stabilization.
-
Pick up a network cable and connect your host router to the repeater using it.
-
Once a steady connection is established, get access to your desktop.
-
Load the most used web browser.
-
Navigate to the location (address) field.
-
Type the Wireless-N repeater’s IP address and press Enter.
-
The repeater’s login screen will show up asking for the login credentials.
This is how you can access the Wireless-N WiFi repeater’s IP address correctly. However, if you are still unable to do that, it is time that you try the troubleshooting discussed in the section outlined below.
Solved: Can’t Access Repeater IP Address
-
Make the Correct IP Address Entree
Humans make mistakes and that is totally acceptable. Perhaps, you have done the same thing while entering the default IP address of your WiFi repeater. But, don’t worry. It won’t cause catastrophe.
To rid yourself of the issue you are struggling with, use the correct IP address right away. Make sure that you do not press the Shift key while entering the IP address. Else, a special character will get accessed in place of the repeater’s IP address and you’ll find yourself in the same problem.
-
Never Use the Search Bar
Users often use the search box of the internet browser to access web addresses and IP addresses. As a result, they end up having numerous results but not what they wish for. Are you also doing the same?
If you are nodding your head in yes, then the time to mend your ways has come. Use the address bar without making any delay and see if the Wireless-N repeater’s IP starts working for you or not.
-
Steady Router-Repeater Connection
To do WiFi repeater setup and carry out various operations related to the Wireless-N WiFi repeater, a stable connection between devices must be there. It won’t be possible if WiFi devices are too far (in the case of wireless source) or the network cable is damaged (for a wired source).
Thus, improve the connection strength with respect to the source of connection used. Bring your devices closer (wireless connection) or change the Ethernet cable (wired source). However, the wired source also put forth a condition of a finger-tight connection.
-
Update the Web Browser
Outdated web browsers are known to halt access to various websites including IP addresses. Chances are that you are experiencing the problem due to the same reason.
Therefore, waste no more time navigating to the settings of your internet browser and updating it. Also, delete all those files which are not required.
Quick Tip: Rebooting the repeater can also help you access the IP address in a hassle-free way.
Final Words
A lot of users are unable to access the IP address of their repeaters. However, by implementing the workarounds mentioned above, you will be able to access the repeater’s IP. If it also fails, do not wait to do a Wireless N WiFi repeater factory reset and reconfigure your device from scratch.